HC3 Housing Grip & Tray A left hand grip can be attached to the Seatool HC3 housing using a T-Slide Plate or Direct Base (available separately, as options). The grip can be used to attach an additional light or strobe, and a lens dock to secure INON AD Mount lenses when not in use. The grip slides to the right or left to adjust grip width position. It is machined aluminum for very light weight and durability.

Includes two housing mounting screws
Weight: approx. 260gr (9.2 oz.) / Size: W200 x H140mm (W7.9 x H5.5 inch)

T-Slide Plate in image is separate option

HC3 Housing with two FIX Lights

Seatool INON AD Lens Holder
Attaches to HC3/HC1 PRO/A1 PRO Housing Grip & Tray and conveniently holds INON AD type conversion lenses when not in use.

Compatible with INON AD mount lenses

• When either the UFL-165AD or UWL-105AD lens is mounted to Lens Holder, and then either of these two lenses are attached to HC3 housing port, the image will be partially blocked by the lens installed on the Lens Holder. Therefore, it is not practical to take both of these lenses (UFL-165AD & UWL-105AD) on the same dive, if you intend to store one of them on the Lens Holder.
• With UCL-165AD lens installed on housing port, any other AD lens can be mounted on the lens holder without any problem.
• UWL-100 28AD lens can be installed on lens holder, but is not recommended for use with HC3 because image degradation is too great.

Remote Controller Housing Looking for remote operation to capture sensitive subjects? Add the optional underwater housing for the camera's standard remote controller! 60m (196ft) depth rating Useable controls: Record Start/Stop, Zoom, Photo 5m (16.4 ft) fiber optic cable included